Alphasonik PFZ325E Manuel du propriétaire - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Alphasonik PFZ325E. Alphasonik PFZ325E 16 pages. Full range speaker systems

Imprimer la page

Once you have tested your system and have confirmed that it

is operating properly, turn off your system and prepare for the

final mounting of the speakers.

Position the speaker into the mounting hole and

reconfirm the correct mounting location and hole placement.

Screw clips are provided to insure a snug fit. Place screw clips

over the metal surface and line up the hole with the hole you

have previously drilled. Place the speaker into the hole, align the

mounting holes and proceed to insert the screws. Be sure to

tighten the screws evenly as to not warp the speaker frame.

Turn your system back on and confirm the speaker's

operation, first at low volume and then you may increase the

volume as you desire.

3. The next steps will aid in the proper mounting of the

speaker grilles.

First, locate the special bonding rubber which is located between

the waxed paper in the hardware package.

4. Carefully inspect the mounting ring where the grill

will be inserted. You will notice 4 to 6 channeled areas. This is

the area where the bonding rubber will secure the grill to the

speaker.

5. Break off pieces of the bonding rubber that correspond

to the size of the channels and insert it snugly in place. Once all

of the channels have been filled, carefully insert the grille and

press it firmly into place.

Follow these steps carefully and be patient.