Axxera AXM140BT Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Axxera AXM140BT. Axxera AXM140BT 19 pages.

Power On/Off

Mode

Display

Reset

Set the Clock

Auxiliary Input

Volume

Preset EQ Curves

AXM140BT

Press

or any other button to turn the unit on. Press

again to turn the unit off.

Press MODE to select between AM/FM, USB,

Bluetooth or auxiliary input modes. Modes of operation

are indicated in the display. USB mode will not appear

unless a USB device is connected.

The radio frequency (tuner mode) or MP3 title/track

information (USB mode) will be shown by default. Press

DISP to display the clock. The default display will return

after five seconds.

When in USB mode, the display will alternate between

track number/elapsed time and available MP3

information, including file name, song title, artist name,

album name and folder name.

Press RESET upon initial installation or if abnormal

operation occurs. Reset button is located in the top

right corner.

Press DISP to display the clock, then press and hold

DISP until the hours will flash. Rotate the volume knob

to adjust the hours. Press the volume knob, and the

minutes will flash. Rotate the volume knob to adjust the

minutes.

Insert a 3.5mm connector in the front panel AUX port.

Connect the other end of the 3.5mm connector to the

headphone output of an audio device, MP3 player, etc.

Adjust volume using the volume knob (00-40).

Press EQ to select between the following preset

equalization curves: FLAT, POP, JAZZ, ROCK and OFF.

Note: Ability to manually adjust Bass and Treble settings

is disabled when a preset equalization curve is selected.

Setting equalization curves to OFF enables manual Bass

and Treble adjustments.

OPERATION

General Operation