ARCCAPTAIN ARC200 Manuel de l'utilisateur - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ARCCAPTAIN ARC200. ARCCAPTAIN ARC200 15 pages. Inverter welding machine
Imprimer la page
5.2 Strap Installation
Step 1: Separate the velcro.
Step 2: Pull out one side through the strap hole
on the front panel with hook side of the velcro
up.
Step 3: Pull out it to well stick hook side of the
velcro to loop side and across the nylon buckle.
Repeat it on the other side.
Step 4: Adjust the length by pulling the nylon
buckle (as shown in the picture).
Step 5: Proper state after installation:
1. Strap does not twist;
2. Buckle side of shoulder pad is up, while its
flat side faces the machine (as shown in the
picture);
3. Straps are well locked.
9