Axxess AX-DSP-HYKIA2 Instructions d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Axxess AX-DSP-HYKIA2. Axxess AX-DSP-HYKIA2 4 pages. Hyundai / kia digital signal processor 2011-2016
Imprimer la page
AX-DSP-HYKIA2 LAYOUT
To
Aftermarket
Amplifier
AX-DSP-HYKIA2
• If the Red light in the AX-DSP-HYKIA2 interface is blinking, it is not communicating to the vehicle. Remove the key from the
ignition, unplug the connectors from the interface, and then inspect all connections made. If everything is proper, connect the
harnesses back into the interface, cycle the key to ignition, then re-inspect. The Red light should be solid.
AxxessInterfaces.com
AX-DSP
TROUBLESHOOTING
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
AX-DSP-HYKIA2
I N S TA L L AT I O N I N S T R U C T I O N S
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before doing
so, look over the instructions a second time, and make sure the
installation was performed exactly as the instructions are stated.
Please have the vehicle apart and ready to perform troubleshooting
steps before calling.
To Factory
Amplifier
Connectors
K
P
®
NOWLEDGE IS
OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
REV. 9/24/18 INSTAX-DSP-HYKIA2