Ayra ERO 075 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ayra ERO 075. Ayra ERO 075 17 pages. Led spot moving head
Imprimer la page
Operation and Mounting
To activate the device, plug it into a mains socket. Once it's connected to an active power source, it will turn
on automatically.
During start-up, the device's display will indicate its start-up status and can't be used. The moving head may
vibrate as it calibrates the stepper motors. Once the device has fully started up, it will jump to the last-used
mode. Operation modes and other settings shown on the display can now be adjusted or changed by means
of the menu buttons.
The ERO 075 has a colour display for access to the various operating modes, as well as user adjustable
settings.
Should the device detect a DMX signal, it will automatically switch to DMX mode and will display the last-
used address. For new devices, this will normally be DMX address 001. Of course, you can change the DMX
address via the display using the menu buttons.
Using the display and the menu buttons, you can adjust the functions and settings of the device. Press
'Enter' to confirm an adjustment or select a function, use 'Up' and 'Down' to change amounts and 'Menu' to
go back to the menu.
CONFIRMING OPERATING MODES:
Please note: If you want to use the device in automatic or sound-controlled mode, first confirm the action by
adjusting the value. Next, use the 'Up' and 'Down' arrows to navigate to the 'X' at the top of the display and
press 'Enter' to return to the main menu. Only then will your selected actions be executed.
Confirming with 'Enter' and returning to the main menu via the 'Menu' button will only result in returning to
the main menu, without saving and executing your desired actions.
The menu is divided into segments and contains the following options and functions:
ADDR:
With this function, you can determine the DMX start address of the device. Set it channel 001, and the
device will read DMX channel 1. Set it to channel 003, then the device will read DMX channel 3, etc.
As soon the DMX address is encircled in blue, it can be changed by pressing 'Enter' and using the navigation
buttons to enter the correct address. Press 'Enter' to confirm or press 'Menu' to cancel.
This menu also contains 'prev' and 'next' functions. These are convenient when you're working with multiple
devices. When you press 'prev' or 'next', 14 channels are moved forwards or backwards so the DMX index
can be automatically adjusted. This way, you're able to link device 1 with channel 1, device 2 with channel
15, etc.
The 'CHAN' function is normally used to access another DMX channel mode. This product, however,
supports no DMX modes other than the 14-channel DMX mode.
MODE:
This menu allows you to fully customise your moving head's operating mode using the following functions
and values:
- Auto mode: Auto, Sound, Scene
- Scene mode: Auto, 1-10
- M/S choose: Master, Slave, Scene
- X/Y speed: 000-009
- Gobo speed: 000-009
- Color speed: 000-009
- Gobo rot. speed: 000-009
- Prism speed: 000-009
- Strobe speed: 000-009
- Position: Auto, 01-05
De informatie in deze gebruiksaanwijzing kan gewijzigd worden zonder verdere notificatie.
Versie: 1.0
Aanmaakdatum en initialen auteur: 21-09-2019 RV
Revisiedatum en initialen auteur: -