Ayra ERO Laser Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ayra ERO Laser. Ayra ERO Laser 8 pages. Movinghead with fat beam laser diode
Imprimer la page
Box contents
Box contents
1x ERO Laser movinghead
1x user manual
1x IEC to Schuko power cable
1x mounting bracket with hardware
1x safety eye
Unit and accessory inspection
- Always use the supplied power cable to connect the unit to a power supply. If the cable appears broken or
has visible damage, do not use it. The supplied cable can be replaced with a regular IEC to Schuko cable,
with a minimum cable diameter of 0.75m².
- If the unit will not be used for a longer period of time, disconnect it from the power supply and store it in a
dust-free environment.
- Always check the unit for possible damage before use. If you suspect that something is wrong with the unit,
do not connect it to a power source! When you suspect that your unit is broken or damaged, contact your
local dealer or a certified technician to inspect the unit.
- When your device does not generate any laser beams, do not look directly into the lens. When the laser
suddenly produces a beam, it may cause severe eye damage, possibly resulting in permanent visual loss.