ARCO EzRAID eSATA RAID+ Manuel de démarrage rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} ARCO EzRAID eSATA RAID+. ARCO EzRAID eSATA RAID+ 8 pages.

Imprimer la page

This Quick Start Guide is designed to help you get up and

running quickly. A complete in–depth manual is provided on

the CD–ROM that accompanies your product. The complete

manual describes additional features of the eSATA RAID+™

that are not explained in this document.

1. Before attempting to install the eSATA RAID+™ , close all appli-

cations and shut down and unplug your computer.

2. If you will be mirroring an existing internal drive, you will need to

open your computer and remove the drive from inside the com-

puter. If you are adding a new drive to your system and have an

available external SATA (eSATA) port on the back of your com-

puter, it will not be necessary to open the computer. (You may go

directly to item 4.)

3. If your computer does not have an external SATA port, you will

need to install the provided eSATA connector. First, open the

computer case, then unscrew and remove one of the computer's

unused back panel plates. Seat the eSATA connector in an open

slot and replace the screw to attach it. Attach the connector's red

SATA cable to a free internal SATA port on your motherboard.

Close the computer case.

4. Place the eSATA RAID+ on a level surface. Insert one end of the

provided eSATA cable into the device and attach the other end to

the eSATA connector or port on the back of your computer.

Attach the power cable and plug the eSATA RAID+ unit into

power.

5. Insert a drive into each caddy and secure it with the provided

screws. Replace the caddies and lock with the provided keys to

enable system access to the drives. (If installing a drive with an

existing operating environment, be sure to place this drive in the

Chan 1 slot and the new drive in Chan 2. The second drive must

Quick Start Guide