AccuStrata FLUOROTEK 200 Manuel de démarrage rapide
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} AccuStrata FLUOROTEK 200. AccuStrata FLUOROTEK 200 2 pages. Handheld fluorometer
Également pour AccuStrata FLUOROTEK 200 : Manuel d'instruction (17 pages)
FLUOROTEK 200
Handheld Fluorometer
Thank you for purchasing the Fluorotek 200 handheld fluorometer. We
are committed to ensuring that the product serves your needs in the best
possible manner. If you need assistance, technical support is available
via the contact information at the bottom of the page. This quick start
guide will help familiarize you with the Fluorotek 200 and guide you
through the measurement steps.
Test Kit Materials
1
Fluorotek 200 handheld unit
Light-blocking cap for sample holder
USB drive containing PC software and pdf documents for quick start and
user's manual
Setup
2
Remove battery cover on the back of the Fluorotek 200 by gently pressing
the corrugated section and pulling the cover toward the bottom of the unit.
Install 4-AA batteries on the back side of the Fluorotek 200 in the
orientation drawn on the battery compartment.
Replace the battery cover by inserting it into the groves and pushing it up
toward the top of the unit.
Turn the unit on by sliding the switch on the top right of the Fluorotek 200
to the left.
Quick Start Guide
AccuStrata, Inc.
11900 Parklawn Dr., Suite 203
Rockville MD 20852
(240) 223-5400 | www.accustrata.com