Digisol RANGER SERIES Manuel d'installation rapide - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Digisol RANGER SERIES. Digisol RANGER SERIES 12 pages. 2.4ghz ge outdoor access point with poe
Également pour Digisol RANGER SERIES : Manuel d'installation rapide (16 pages)
Imprimer la page
Press OK.
Type ipconfig to get the IP of default gateway.
Type "ping 192.168.123.254". Assure that you ping the correct IP
Address assigned to the load balancing Router. It will show four
replies if you ping correctly.
Ensure that your Ethernet Adapter is working, and that all network
drivers are installed properly. Network adapter names will vary
depending on your specific adapter. The installation steps listed
below are applicable for all network adapters.
Go to Start > Right click on "My Computer" > Properties.
Select the Hardware Tab.
Click Device Manager.
Double-click on "Network Adapters".
Right-click on Wired Card bus Adapter or your specific network
adapter.
Select Properties to ensure that all drivers are installed properly.
Look under Device Status to see if the device is working properly.
Click "OK".
10