Epson 710C - PowerLite UXGA LCD Projector Spécifications - Page 4
Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Epson 710C - PowerLite UXGA LCD Projector. Epson 710C - PowerLite UXGA LCD Projector 8 pages. Epson technical brief for multimedia projectors
Également pour Epson 710C - PowerLite UXGA LCD Projector : Pièces de rechange (1 pages), Fiche technique (2 pages), Supplément au manuel de l'utilisateur (39 pages), Fiche technique (7 pages)
Imprimer la page
EPSON PowerLite 500c/700c/710c Projector
Projector Status Lights
The lights on top of the projector indicate the projector's
status and let you know when a problem occurs.
Light
Status
Description and action
orange
The projector is in sleep mode. You can unplug
it or press the Power button to turn it on.
flashing
The projector is warming up. Wait for the image
green
to appear.
green
The projector is operating normally.
flashing
The projector is cooling down. You can't turn
orange
the projector on or unplug it when the light is
flashing.
red
Power is cut off because of an internal
problem. Contact EPSON for help.
red
The lamp is almost burned out. This is a good
time to replace it. See page 6 for instructions.
flashing
The lamp is burned out. Replace the lamp,
orange
following the instructions on page 6.
flashing
There is a problem with the lamp, power
red
supply, fuse, or circuit. Contact EPSON for
help.
flashing
The projector is too hot. Turn it off and let it
orange
cool before using it.
red
The projector has turned off automatically
because it has overheated. Let it cool for a few
minutes, then turn it back on. Make sure
nothing is blocking the vents on the front and
top of the projector. If it continues to overheat,
you may need to change the air filter. See
page 6 for instructions.
flashing
There is a problem with the cooling fan or
red
temperature sensor. Contact EPSON for help.
EPSON PowerLite 500c/700c/710c Projector
4 -
Using the Remote Control
The remote control lets you access all of your projector's
features from anywhere in the room (up to 30 feet away). You
can use it to turn the projector on and off, zoom the image,
and display the projector's setup menu, for example.
If you have connected the mouse cable, you can also use the
remote control as a wireless mouse to run your presentation.
power light
lamp light
temperature
light
A/V Mute
Special effects or
drawing buttons
Illumination
Open the cover just below the
remote control functions:
S-video
Picture in picture
1/00
IR output
Power
Freeze
Freeze
A/V Mute
E-Zoom
R/C ON
E-Zoom
OFF
3
Enter
Esc
Esc
Freeze
A/V Mute
E-Zoom
3
Enter
Esc
Menu
Menu
Comp
Comp
S-Video
Video
Auto
Resize
Auto
P in P
- Volume +
Power
Remote
control on/off
Enter
Esc
button to access these
Power
R/C ON
OFF
Help
Help
Video
Resize
Volume