ActronAir WRE-072CS Manuel du propriétaire - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} ActronAir WRE-072CS. ActronAir WRE-072CS 16 pages. Wall hung systems
Également pour ActronAir WRE-072CS : Manuel d'installation et de configuration (16 pages)
Imprimer la page
Owner's Manual
03.02. Achieving Optimal Performance
Optimal performance for the COOL, HEAT, and DRY mode can be achieved in the temperature ranges shown
in the table below. If the unit is used outside of these ranges, certain safety protection features will activate and
cause the unit to perform at a reduced capacity.
Indoor Temperature
Outdoor Temperature
NOTE
To further optimize the performance of the unit, do the following:
• Keep doors and windows closed.
• Limit energy usage by using TIMER ON and TIMER OFF functions.
• Do not block air inlets or outlets.
• Regularly inspect and clean air filters.
03.03. Features
NOTE
Refer to remote manual for full features list.
Auto-Restart
If the unit loses power, it will automatically restart with the prior settings once power has been restored.
Anti-mildew
When the unit is turned off after COOL, AUTO or DRY mode, the unit will continue to operate a low power to dry up
condensed water to prevent mildew growth.
Easyconnect Control (Optional)
Allows you to control the unit using a mobile phone and a wireless connection. Installation is required to be undertaken
by a licensed technician. Easyconnect is an accessory that may be purchased separately.
Louvre Angel Memory
When turning on your unit, the louvre will automatically resume its former angle. Aim the louvre higher to avoid direct
airflow. This setting is found under the SET menu.
Active Clean Function
It washes away dust, mold and grease when it adheres to the heat exchanger, by automatically freezing and then rapidly
thawing frost. Active Clean function is used to produce more condensed water to improve the cleaning effect. After
cleaning, the internal blower fan operates with hot air to blow-dry the evaporator and prevent the growth of mold.
When this function is turned on, the indoor unit will display CL. After 20 to 45 minutes, the unit will turn off
automatically and Active Clean function will be deactivated.
6
COOL Mode
HEAT Mode
17°C - 32°C
0°C - 30°C
-15°C - 60°C
25°C - 30°C
Owner's Manual - Wall Hung Split System
Doc. No.9590-4011 Ver. 2 210622
Wall Hung Split System
DRY Mode
10°C - 32°C
0°C - 60°C