Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Setup in Cisco Unified Communications Manager
this URL:
list.html.
The Cisco Unified Wireless IP Phone 7926G must be running Firmware Version 1.4(1) or later.
Note
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Setup in Cisco
Unified Communications Manager
To add phones to the Cisco Unified Communications Manager Administration, you can use:
• Autoregistration
• Cisco Unified Communications Manager Administration
• Bulk Administration Tool (BAT)
• BAT and the Tool for Auto-Registered Phones Support (TAPS)
For general information about configuring phones in Cisco Unified Communications Manager, see the "Cisco
Unified IP Phone" chapter in the Cisco Unified Communications Manager System Guide.
Related Topics
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Installation, on page 20
Cisco Unified Communications Manager Phone Addition Methods
Features, Templates, Services, and Users
Cisco Unified Communications Manager Setup for Cisco Unified Wireless IP Phone 7925G, 7925G-EX,
and 7926G
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Installation
After you have added the phones to the Cisco Unified Communications Manager Administration, you can
complete the phone installation. You can install the phone or the user can install the phone. The Cisco Unified
Wireless IP Phone 7925G, 7925G-EX, and 7926G Installation Guide provides directions for assembling the
phone and accessories and charging the battery.
Before using the phone to connect to the wireless LAN, you need to configure a network profile for the phone.
You can use the phone web pages to set up the network profile and other phone settings, or you can configure
the network profile using the menus on the phone.
If you use autoregistration that is part of Cisco Unified Communications Manager Administration, you need
to update the specific configuration information for the phone such as associating the phone with a user,
changing the softkey template, or changing the directory number (DN).
Before you install a phone, even if it is new, upgrade the phone to the current firmware image. For
Note
information about upgrading, see the readme file for your phone which is located at:
cgi-bin/tablebuild.pl/ip-7900ser-crypto.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
20
http://www.cisco.com/en/US/products/hw/phones/ps379/products_implementation_design_guides_
Cisco Unified Wireless IP Phone
http://www.cisco.com/
Imprimer la page