Cisco 7985 Manuel du système - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel du système pour {nom_de_la_catégorie} Cisco 7985. Cisco 7985 36 pages. Cisco unified ip phones chapter 43

Imprimer la page

Softkey Template Operation

For applications such as Cisco Unified CallManager Assistant to support softkeys, ensure softkeys and

softkey sets are configured in the database for each device that uses the application.

You can mix application and call-processing softkeys in any softkey template. A static softkey template

associates with a device in the database. When a device registers with Cisco Unified CallManager, the

static softkey template gets read from the database into call processing and then gets passed to the device

to be used throughout the session (until the device is no longer registered or is reset). When a device

resets, it may get a different softkey template or softkey layout because of updates that the administrator

makes.

Softkeys support a field called application ID. An application, such as Cisco Unified CallManager

Assistant, activates/deactivates application softkeys by sending a request to the device through the Cisco

CTIManager and call processing with a specific application ID.

When a user logs in to the Cisco IP Manager Assistant service and chooses an assistant for the service,

the application sends a request to the device, through Cisco CTIManager and call processing, to activate

all its softkeys with its application ID.

At any time, several softkey sets may display on a Cisco Unified IP Phone (one set of softkeys for each

call).

The softkey template that is associated with a device (such as a Cisco Unified IP Phone) in the database

designates the one that is used when the device registers with call processing. Perform the association

of softkey templates and devices by using Softkey Template configuration in Cisco Unified CallManager

Administration. See

Administration Guide.

Common Phone Profiles

Cisco Unified CallManager uses common phone profiles to define phone attributes that are associated

with Cisco Unified IP Phones. Having these attributes in a profile instead of adding them individually to

every phone decreases the amount of time that administrators spend configuring phones and allows the

administrator to change the values for a group of phones. Common phone profiles specify the following

attributes:

•

The common phone profile remains a required field when phones are configured; therefore, you must

create the common phone profile before you create a phone. Cisco Unified CallManager provides a

Standard Common Phone Profile that you can copy and modify to create a new common phone profile.

You cannot, however, modify nor delete the Standard Common Phone Profile.

For information on configuring common phone profiles, see

the Cisco Unified CallManager Administration Guide.

Cisco Unified CallManager System Guide

43-20

"Softkey Template Configuration"

Profile name

Profile description

Local phone unlock password

End user access to phone background image setting

Chapter 43

in the Cisco Unified CallManager

"Common Phone Profile Configuration"

Cisco Unified IP Phones

OL-14153-01