Cisco Cisco Access Registrar 4.2 Configuration des paramètres du réseau - Page 28
Parcourez en ligne ou téléchargez le pdf Configuration des paramètres du réseau pour {nom_de_la_catégorie} Cisco Cisco Access Registrar 4.2. Cisco Cisco Access Registrar 4.2 34 pages. Telepresence conference system
Également pour Cisco Cisco Access Registrar 4.2 : Manuel de l'utilisateur (44 pages), Manuel de démarrage (46 pages)
Imprimer la page
Modifying VLAN Settings
Step 2
Step 3
Step 4
Using the Phone Network Configuration Screen
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-28
In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
To enable VLAN, in the OpFlags field, change bit 5 to 0 (zero).
To disable VLAN, in the OpFlags field, change bit 5 to 1.
For more information about this field, see OpFlags parameter in
page
A-16.
Click Apply.
Procedure
Display the Network Configuration menu.
For instructions, see the
on page
4-4.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to VLAN Enabled.
If VLAN is enabled, the option appears as
VLAN Enabled YES
Press the No softkey to disable VLAN.
Press Save.
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-5.
Table A-5 on
OL-8617-01