Ricoh Ri 100 Manuel rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Ricoh Ri 100. Ricoh Ri 100 4 pages. Direct to garment (dtg) printer
Également pour Ricoh Ri 100 : Notes (12 pages), Manuel d'information sur la sécurité (24 pages), Manuel d'entretien (12 pages), Manuel d'installation rapide (4 pages), Manuel rapide (4 pages), Manuel d'installation rapide (23 pages), Notes à l'attention des utilisateurs (32 pages)

Ricoh Ri 100 Manuel rapide
Basic Usage of the Finisher
CAUTION:
If children use this machine, their parents must be with them and they should be very careful in using
this machine. Otherwise, injury or burns may result.
The finisher has "Standard mode" and "Professional mode".

Standard mode

The factory-default setting is standard mode. The finisher has the following functions
to prevent children from touching the inside of the finisher accidentally when it is very
hot.
When the inside of the finisher exceeds 70 °C (158 °F), the front cover locks. To
open the front cover, press the [Stop/ Unlock] key for at least 1 second.
Professional mode
To use this mode, switch from standard mode.
As this mode is for users who are accustomed to using the finisher, the front cover
does not lock even when the temperature of the inside of the finisher exceeds 70 °C
(158 °F).
However, during press processing and fixing processing, the front cover locks regard-
less of whatever mode is used to prevent erroneous operations.
How to Switch Between Stan-
dard Mode and Professional
Mode
Press the [Temperature] key and [Fix-
ing Time] key simultaneously for at
least 2 seconds.
Unlock Cover
When set to standard mode, press
the [Stop/ Unlock] key for at least 1
second.
When set to the professional mode,
it is not necessary to hold down the
DSB547
[Stop/Unlock] key.
© 2017 Ricoh Co., Ltd.
EN GB
EN US
EN AU
DSB548
J361-6607C