Ricoh SP3 Bulletin technique - Page 11

Parcourez en ligne ou téléchargez le pdf Bulletin technique pour {nom_de_la_catégorie} Ricoh SP3. Ricoh SP3 28 pages.

Model:

SP3

2.3.2 HOW TO DOWNLOAD NEW SYSTEM SOFTWARE

NOTE: Before doing this, remove all printer/network cables from the SP3.

1. Check that the parallel cable is properly connected to the downloading computer.

2. Turn on the SP3, then turn on the computer.

3. Copy the new system software file to the computer's hard disk.

4. Check the location of the SCOPY program files (BAT file and EXE files) on the

computer.

5. Check the printer port to which the parallel cable is connected (LPT1).

6. After the DOS prompt appears, change to the directory that contains the SCOPY

program files,

7. On the SP3, enter the Maintenance Menu through the control panel.

Refer to the "How to enter the Maintenance Menu" section.

8. On the SP3, press the "Execute" button in the "Download new system software"

screen. The control panel displays the following message:

"Are you sure you want to Download New System Software?"

If the computer is ready to upload the software, press the "Yes" button.

9. On the computer, type the following at the DOS prompt in the directory where

SCOPY.BAT is.

SCOPY (space)File name(space)

Example:

echnical

c:\SCOPY\SCOPY s201r.img LPT1

ulletin

Date:

15-Mar-98

PAGE: 2/3

No: