Cisco 12016 Manuel d'instructions de remplacement - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de remplacement pour {nom_de_la_catégorie} Cisco 12016. Cisco 12016 18 pages. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Également pour Cisco 12016 : Instructions de déballage Manuel (28 pages), Fiche technique (9 pages), Manuel d'instructions (16 pages), Manuel d'instructions de remplacement (32 pages)

Lift up the air filter and carefully slide it out the door

Step 2

Caution

Be careful not to damage the honeycomb screens on the back of the air filter door and in

the fabric card cage. Damage to the honeycomb screens can restrict airflow, cause

overheating, and affect EMI performance.

Figure 5

Air filter

Push filter up

with palm

and fingertips

Step 3

Visually check the condition of the air filter to determine whether to clean or install a new replacement.

•

Dirty—You can vacuum or replace the filter.

Caution

Do not vacuum the air filter while it is installed in the chassis. You must remove the air filter completely

before you clean it to prevent contaminants from being drawn into the bays or cage.

Worn or torn—If the filter appears worn or torn, dispose of it in a responsible manner and install a

•

replacement air filter (ACS-GSR16-FLTR=).

78-16083-02

Removing the Chassis Air Filter

Cisco 12016, Cisco 12416, and Cisco 12816 Router Blower Module and Air Filter Replacement Instructions

Cleaning or Replacing the Chassis Air Filter

(Figure

5).