Cisco 1751 Manuel de démarrage rapide - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco 1751. Cisco 1751 35 pages. Modular access router
Également pour Cisco 1751 : Aperçu de la solution (16 pages), Fiche technique (19 pages)

Imprimer la page

Configuring Voice-over-IP

To obtain the SDM release notes, and other SDM documentation, go to

and click the Technical Documentation link.

If you need to configure Voice-over-IP, use the

Note

Guide.

Configuring Voice-over-IP

Voice-over-IP (VoIP) enables a Cisco 1751 router to carry voice traffic (for example, telephone calls and

faxes) over an IP network, simultaneously with data traffic. (See

configuration tools and the major configuration tasks to configure the router.

Figure 10

Configuration Tools

You can configure VoIP by using one of the following tools:

•

Cisco ConfigMaker Application

Use the Cisco ConfigMaker application to address and configure one or more devices or to create an

entire network. A series of wizards and dialog boxes can make your voice-configuration task simple and

fast.

Follow these steps to install the Cisco ConfigMaker application on your PC:

Step 1

Disable any virus-scanning software you have running.

Step 2

Close all programs active on your PC.

Step 3

Insert the CD into your CD-ROM drive.

The Cisco ConfigMaker installer starts automatically.

Step 4

Cisco 1751 Voice-over-IP Quick Start Guide

Voice and Data Traffic on an IP Network

Cisco ConfigMaker application

Cisco IOS command-line interface (CLI)

Configuring Voice-over-IP

IP cloud

http://www.cisco.com/go/sdm

section of this Quick Start

Figure

10.) This guide describes the

78-11259-05