Cisco 2950 - Catalyst Switch Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco 2950 - Catalyst Switch. Cisco 2950 - Catalyst Switch 19 pages. Long-reach ethernet switches
Également pour Cisco 2950 - Catalyst Switch : Manuel de solution (17 pages), Bulletin d'information sur les produits (3 pages), Bulletin d'information sur les produits (5 pages), Manuel de migration (25 pages), Bulletin d'information sur les produits (6 pages), Manuel de démarrage (29 pages), Fiche technique (20 pages)

Cisco - Connecting a Terminal to the Console Port on Catalyst Switches

number is CAB-S3-CONSOLE=.

Note: The auxiliary (AUX) port is not supported.

Figure: EIA/TIA-232 RJ-45 Adapter Cable Connector

Table E-1: Supervisor Engine III Console Port Pinouts RJ45-to-DB25 Adaptor Cable

RJ45 on Switch Console

(DTE) (Uses straight through

cable.)

1 RTS (looped to pin 8)

2 DTR

3 RxD

4 GND

5 GND tied to 4

6 TxD

7 DSR

8 CTS (looped to pin 1)

Table E-2: Supervisor Engine III Console Port Pinouts RJ45-to-DB9 Adaptor Cable

RJ45 on Switch Console (DTE)

(Uses straight through cable.)

1 RTS (looped to pin 8)

2 DTR

3 RxD

4 GND

5 GND tied to 4

6 TxD

7 DSR

8 CTS (looped to pin 1)

Configuring a Terminal for Attachment to the Console Port

Note: The console port is an asynchronous (Async) serial port; any device connected to this port must be

capable of asynchronous transmission.

http://www.cisco.com/warp/public/473/9.html (10 of 19) [9/4/2003 12:36:03 PM]

DB25 on Terminal (DTE)

6 DSR

2 TxD

7 GND

3 RxD

20 DTR

DB9 on Terminal (DTE)

6 DSR

3 TxD

5 GND

2 RxD

4 DTR