Cisco 3825 Series Politique de sécurité non propriétaire - Page 14
Parcourez en ligne ou téléchargez le pdf Politique de sécurité non propriétaire pour {nom_de_la_catégorie} Cisco 3825 Series. Cisco 3825 Series 30 pages. Integrated services routers
Également pour Cisco 3825 Series : Installation et mise à niveau (20 pages), Manuel de démarrage rapide (38 pages), Manuel de démarrage rapide (40 pages)
Imprimer la page
Cisco 3825 and Cisco 3845 Routers
Tamper evidence label B shall be placed so that one half of the label covers the bottom of the front panel
Step 3
and the CF card and the other half covers the enclosure.
Tamper evidence labels C and D should be placed so that the one half of the label covers the enclosure
Step 4
and the other half covers the left and right upper ENM slots.
Tamper evidence label E should be placed so that the one half of the label covers the lower right ENM
Step 5
slot and the other half covers the enclosure.
Tamper evidence label F should be placed so that the one half of the label covers the left upper and lower
Step 6
HWIC slots and the other half covers the enclosure.
Tamper evidence label G should be placed so that the one half of the label covers the right upper and
Step 7
lower HWIC slots and the other half covers the enclosure.
Allow the labels five minutes to completely cure.
Step 8
Figure 7
Figure 7
Figure 8
To apply serialized tamper-evidence labels to the Cisco 3845:
Clean the cover of any grease, dirt, or oil before applying the tamper evidence labels. Alcohol-based
Step 1
cleaning pads are recommended for this purpose. The temperature of the router should be above 10 C.
Tamper evidence labels A and B should be placed so that one half of the label covers the front panel and
Step 2
the other half covers the enclosure.
Tamper evidence label C should be placed so that one half of the label covers the left upper and lower
Step 3
ENM modules and the other half covers the enclosure.
Tamper evidence labels D and E should be placed so that one half of each label covers the side of right
Step 4
ENM modules and the other half covers the enclosure.
Cisco 3825 and Cisco 3845 Integrated Services Routers FIPS 140-2 Non Proprietary Security Policy
14
and
Figure 8
show the tamper evidence label placements for the Cisco 3825.
Cisco 3825 Tamper Evident Label Placement (Front View)
Cisco 3825 Tamper Evident Label Placement (Back View)
OL-8662-01