Actuator Systems TCR-40C Series Instructions d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation pour {nom_de_la_catégorie} Actuator Systems TCR-40C Series. Actuator Systems TCR-40C Series 7 pages. Intelligent on/off actuator
Imprimer la pageTCR-40C-All
Series-Intelligent on/off actuator usage instructions
□
Indoor and outdoor are both optional.
□
Not explosion proof products,
□
You need to install protective device for the actuator,if it is exposed to the rain or sunshine .
□
Please pay attention to the ambient temp.
□
When installing, you need to consider the reserved space for wiring and repairing.
□
When power on,
□
When power on,
□
※Absolutely no falling down the ground, which will hit the device and lead to improper operation.
□
※Absolutely no standing on the device, which will cause device malfunction or personal accident.
□
※It is forbidden to do wiring project in rainy day or when there is water splash.
Safety notice
□
In order to use the device safely for a long term, please pre-read the manual carefully to ensure correct use.
□
Notice item: Please understand the product specification and using method clearly to prevent persona safety
danger or device damage.
□
In order to indicate damage and danger, here we classify them as "warning
□
Both of contents are very important, which should be obeyed strictly.
"Warning
": It will cause death or serious injury if not obeyed.
"Notice
": It will cause slight injury or device damage if not obeyed.
※
□
Su bject to technical changes.
特克
.com
Made in china Global service
use feedback signal to control actuator
△1
return difference increases due to abrasion between
△2
actuator and valve rod
do not use them in flammable and explosive environment.
it is not allowed to dismantle actuator and valve.
it is not allowed to do wiring.
®
Success comes from our persistent pursue of perfect details.
Excellence originates from our persistence of win-win philosophy.
Connect power
Check whether voltage is within the normal range
Check whether valve gets stuck or torque value is too big
Check and correctly connect terminal
Contact the manufacturer to get repair
Connect user acquisition signal
Connect power and signal will be normal
Contact the manufacturer to get repair
" and "notice
".
※
PART 2
User Manual
ISO9001
ISO9001
ver:
20161015
7