Ace Amusement Robot Storm Manuel - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Ace Amusement Robot Storm. Ace Amusement Robot Storm 18 pages.
Imprimer la page
IX. Fault Analysis and Troubleshooting
Common faults
Fault phenomena
After the machine
The monitor is not energized.
is powered on,(the
power supply fan
The signal wire of the display is not
works),
but
the
connected or damaged.
display is not on.
The power supply is inconsistent with the
machine's parameters.
After the machine
Fuse is burnt out.
is
powered
on,
nothing
happens
and the screen is
The power supply is not connected.
not lit.
The signal wire of the display is not
connected or damaged.
Check whether the input of the 110V~220V
The machine is not
power supply is right. The short circuit is
powered on.
not allowed.
The control panel
Check whether the output of 12V of the
is not powered on
power supply box is normal.
The cable of the display might fall off or be
The display has no
loosen due to vibration.
raster.
The display is not on..
The circuit protector generates an action
The power is off on
and the power switch is turned off (Note:
the midway.
The circuit protector cuts off the current
when the abnormal current flows).
After the product is
powered on, the
display is a white
The host machine does not work.
screen without any
image or sound.
Pressing start key
The start button holder is loose,
cannot
start
the
switch line is loose.
Main cause
and the
13
Corrective action
Please reconnect the power cable or
replace it with new.
Please reconnect the signal wire or
replace it with new.
Please check whether the power supply
is
consistent
with
parameters.
Please replace the fuse.
Please
confirm
110V~220V
supply is connected and the power
switch is on
The signal wire of the display is not
connected or damaged.
Please check whether the voltage of the
circuit board inside the machine is
abnormal.
Please adjust the cable to the correct
position.
Please check the power supply circuit or
replace the power line.
Turn on the machine again manually.
Please turn on the power switch again.
When the circuit protector repetitively
acts, it indicates that the machine is
abnormal. Please contact the dealership.
Manually start the power start button of
the host machine.
The host power is bad or replaced.
The motherboard memory bank is bad or
replaced.
The motherboard is bad. Please contact
professional and manufacturer.
The button holder is broken or replaced,
the switch wire is pressed, and the start
the
machine's
power