Cisco Meraki CW9162I-MR Manuel d'installation du matériel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Cisco Meraki CW9162I-MR. Cisco Meraki CW9162I-MR 23 pages.

Imprimer la page

2.3 Security Features

The CW9162I-MR features multiple options for physically securing the access point after installation:

1. Security screw – The accessory kit includes screws that can be used to secure the

access point to the mount plate. Engaging the security screw prevents accidental

dislodging and theft.

2. Kensington lock – The access point contains a hard point that allows it to be secured to

any nearby permanent structure using a standard Kensington lock.

2.4 Ethernet Ports

The CW9162I-MR features an Ethernet RJ45 port that accepts 802.3af power (labeled "PoE"). This

port should be used for uplink to your WAN connection.

2.5 Power Source Options

The CW9162I-MR access point can be powered using either the Meraki AC Adapter or 802.3af PoE

Injector (both sold separately) or a third-party 802.3af PoE switch.

2.6 Factory Reset Button

If the button is pressed and held for at least five seconds and then released, the CW9162I-MR will

reboot and be restored to its original factory settings by deleting all configuration information stored on

the unit.