ACE CAM A16 Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ACE CAM A16. ACE CAM A16 15 pages.

2) Please check your dvr MENU settings if you have configured Loop Recording.

You must select Loop Recording 'ON' for this function to enable overwriting of

videos.

3) Please check your dvr MENU settings if you have turned OFF G-Sensor, Parking

Monitor & Motion Detect. If G-Sensor is on, the file will be protected to lock

those files and they can not be overwritten, also the dvr will automatically go to

recording all the time if Parking Monitor & Motion Detect is on, so the SD card

will quickly fill.

4) Your storage card may have read/write issues with locked files and may need

regular formatting. Fully clear the card by reformatting manually. You may need to

do this manual cleaning if you regularly if you have a lot of locked files on the card.

Q: Why does my dvr camera turn on & off continuously?

A: Please check first if your dvr MENU settings are set on for the Parking

Monitor and G-Sensor. Normally when the dvr enters Parking Monitor the

camera will record automatically once it detects any touch or shake. Thus with

constant vibrations, it can automatically turn on and off continuously.

The G-Sensor will also lock video files to avoid overwriting and allowing you to keep

the files as parking evidence.

Please turn off these 2 functions in the MENU settings then try again if your

camera is turning off and on continuously.

Also, please try turning off the Motion Detect function in the MENU settings. If

Motion Detect is turned on, it will automatically initiate recording once there is

any movement detected from the front camera.