Epson L200 Manuel d'entretien - Page 32

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Epson L200. Epson L200 47 pages. Color inkjet printer
Également pour Epson L200 : Spécifications (4 pages), Manuel de l'utilisateur (4 pages), Instructions (4 pages), Commencer ici (2 pages), Manuel de l'utilisateur (2 pages), Avis et garantie (12 pages)

Imprimer la page

L200/L201/L100/L101

CR Encoder

Step 2

Main Frame

Holder FFC

Hole

Head FFC

When installing the Head FFC to the Carriage, route the Head FFC through the rib (x1) on the rear of the Carriage, and connect the Head FFC to the CR

Encoder.

When installing the Head FFC to the Main Frame, route the Head FFC in the procedure below and connect it to the Main Board.

1. Align the fold line of the Head FFC with the rib (x1) of the Holder FFC, and route the FFC through the Holder FFC as shown in the figure above.

2. Route the Head FFC through the hole of the Main Frame.

3. Align the hooks (x4) of the Holder FFC with the holes (x4) on the Main Frame, and secure the Holder FFC to the Main Frame by sliding it to the 80-digit side.

Panel Board (L100/L101)

Upper Housing

Panel Board

Panel FFC

Ferrite Core

When routing the Panel FFC, follow the instructions below.

1. Route it through the Ferrite Core and the hook (x1).

2. Secure the FFC with double-sided tape (x2) to the Upper Housing, and then secure the Ferrite core with the hooks (x2).

Disassembly/Assembly

Head FFC

Step 1

Holder FFC

Fold line

Head FFC

Step 3

Main Frame

Holder FFC

Rib

Head FFC

Hook

Upper Housing

Panel FFC

Hook

Double-sided tape (8 x 20 mm)

PF Motor

PF Motor cable

PF Motor

Set the Ferrite Core of the PF Motor cable into the ribs of the Frame Base.

Routing FFCs/cables

Ferrite Core

Rib

Revision A

Confidential