Sony SRG-300SE Manuel technique - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Sony SRG-300SE. Sony SRG-300SE 42 pages. Hd color video camera
Également pour Sony SRG-300SE : Manuel technique (41 pages), Manuel d'installation (2 pages)

Sony SRG-300SE Manuel technique
When Auto Slow Shutter is Off (initial setting)
AGC
ICR
MAX
GAIN
ICR ON
Dark
ICR OFF  ON
When Auto Slow Shutter is On
Note
Depending on the information such as brightness, etc., in the ON/
OFF settings condition, a malfunction may occur when the subjects
largely consisting of blue and green colors are taken.
Shutter 1/60 sec
IRIS
OPEN
IRIS
SHUTTER
Bright
Camera ID
The ID can be set up to 65,536 (0000 to FFFF). As this
will be memorized in the nonvolatile memory inside,
data will be saved.
Picture Effect
It consists of the following functions.
• Neg. Art: Negative/Positive Reversal
• Black & White: Monochrome Image
Others
I/F Clear
Clears the Command buffer of the camera.
The buffer is cleared even during the power on state using
the control software.
Address Set
VISCA is a protocol, which supports a daisy chain of up to
seven connected cameras via RS-422 interface. In such cases,
the address set command can be used to assign addresses
from 1 to 7 to each of the seven cameras, allowing you to
control the seven cameras with the same personal computer.
Be sure to use the address set command to set the address
whenever a camera is connected for the first time.
Memory (Preset)
Using the preset function, 16 sets of camera shooting
conditions can be stored and recalled.
This function allows you to achieve the desired status
instantly, even without adjusting the following items
each time.
• Pan/Tilt Position
• Zoom Position
• Digital Zoom On/Off
• Focus Mode Auto/Manual
• Focus Position
• Exposure mode
• Shutter speed
• Bright Level
• Iris
• Gain
• Exposure Compensation
• Exposure Compensation Value
• Backlight Compensation On/Off
• Auto Slow Shutter On/Off
• White Balance Mode
• Aperture Value
• Day/Night ICR function status
• WDR (View-DR)
Basic Functions