Sony TS-DSC-P41-01 Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Sony TS-DSC-P41-01. Sony TS-DSC-P41-01 12 pages. Sony camera tracksnap manual

Imprimer la page
TrackSnap Manual
Switches 5, 6, and 7 setups which camera is attached to your PixController board. Note: Even though there
are 2 different PIC controller chips available for the PixController LE (Original and LE II) your camera is using
the Original chip. Both are listed below are the settings for the corresponding controller chip for reference on
which other cameras can be used.
Camera (Original LE)
Sony/Canon LANC Camcorder -
ACC-Terminal -
Plug-n-Play
Sony DSC-PXX (Sony P32/P41)
Minolta X20, Sony DSC-UXX (Sony U30)
RSS (D380/D370/35mm always on mode)
RSP (on/off digital camera mode using external supply)
RSP3i (on/off mode, internal supply, D370/D380)
RSP4i (on/off mode, internal supply, D390/D395)
Sony/Canon LANC Camcorder in VTR mode -
Sony/Canon LANC Camcorder in Photo mode -
Sony DSC-S40/DSC-S600
Samsung A402
Olympus D-425
Digital Concepts 2.1 (DC 2.1)
DVR - Wireless (DVR control mode for wireless video cameras)
Olympus D-360L "Hardwire"
Switch 8 controls the operation of the attached camera. You can either setup your camera in digital still mode,
or movie/double photo mode. If you want to take digital movies with your digital camera you must have your
digital camera setup in movie mode. If your camera setting is in RSP mode, however, you can setup Charge
Mode On/Off, which is used to keep your camera settings. Note, when the board is setup in LANC mode these
setting will not apply. You must follow the "LANC Video Delay Setting" listed below.
Still / RSP Charge Mode off
Movie or Double Photo / RSP Charge Mode On
Switch 9 controls fast/slow camera operation. This is useful for setting up fast/slow refresh mode in RSS
camera mode, or setting up a delay for larger memory cards. If switch 8 is setup in "Movie Mode" then this
switch setting is for 10 or 15 second movie clip, or the time delay between double photo modes. If you want to
take digital movies with your digital camera you must have your digital camera setup in movie mode. Note,
when the board is setup in LANC mode these setting will not apply. You must follow the "LANC Video Delay
Setting" listed below.
Fast / 10 second digital movie clip
Slow / 15 second digital movie clip
Version
TS P41.2
This document comprises information provided by Suppliers and is
Plug-n-Play
Camera (LE II)
Picture Mode
Camera Mode
assumed to be correct.
Switch 5
Down/Off
Down/Off
Down/Off
Down/Off
Up/On
Up/On
Up/On
Up/On
Switch 5
Plug-n-Play
Down/Off
Plug-n-Play
Down/Off
Down/Off
Down/Off
Up/On
Up/On
Up/On
Up/On
Page 6 of 12
Model TS-DSC-P41-01
Switch 6
Switch 7
Down/Off
Down/Off
Down/Off
Up/On
Up/On
Down/Off
Up/On
Up/On
Down/Off
Down/Off
Down/Off
Up/On
Up/On
Down/Off
Up/On
Up/On
Switch 6
Switch 7
Down/Off
Down/Off
Down/Off
Up/On
Up/On
Down/Off
Up/On
Up/On
Down/Off
Down/Off
Down/Off
Up/On
Up/On
Down/Off
Up/On
Up/On
Switch 8
Down/Off
Up/On
Switch 9
Down/Off
Up/On
Released