Cisco MC2000 Manuel d'instructions - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Cisco MC2000. Cisco MC2000 20 pages. Firepower management center
Également pour Cisco MC2000 : Manuel de démarrage (42 pages)
Imprimer la page
Installing the Processor Air Duct
Figure A-15
1
Installing the Processor Air Duct on Firepower Management Center 1500
and 3500
The Firepower MC1500 and MC3500 Management Centers share some of the same form factors. The
following procedure can apply to either device.
Note
After the processor air duct is installed from a Firepower MC1500 and MC3500, the adjacent PCI Riser
Assembly must be installed.
To install the processor air duct on a Firepower MC1500 or MC3500:
Step 1
Observe the ESD precautions described in
precautions described in
Step 2
Place the processor air duct over the processor socket. The front edge of the air duct should align
correctly with the notches on the fan module. Use caution not to pinch or disengage cables that may be
near or under the air duct. See "1" in
Cisco Firepower Management Center 750, 1500, 2000, 3500, and 4000 Hardware Installation Guide
A-16
Installing the Processor Air Duct on a MC750 Rev. 2
Processor air duct
Safety Warnings, page
Appendix A
Memory Upgrade Instructions for Firepower Management Centers
— —
Working in an ESD Environment, page A-2
A-2.
Figure
A-16.
and the safety