Cisco ONS 15454 Installer - Page 28

Parcourez en ligne ou téléchargez le pdf Installer pour {nom_de_la_catégorie} Cisco ONS 15454. Cisco ONS 15454 32 pages. Four-shelf and zero-shelf bay assembly
Également pour Cisco ONS 15454 : Manuel d'instructions d'installation (22 pages), Installer (32 pages), Déballage et installation (42 pages), Déballage et installation (40 pages)

NTP-A11 Install the Rear Cover

Figure 1-11

EIA Labelling on the Mounting Bar

for all other EIAs

UBIC-V/UBIC-H

mounting hole

Tighten the two screws (48-2116-01) for each mounting bar.

Step 6

Repeat Steps

Step 7

Attach the rear cover (700-06029-XX) by hanging it from the mounting screws on the back of the

Step 8

mounting bars and pulling it down until it fits firmly into place

(Figure

Cisco ONS 15454 Procedure Guide, R5.0

1-28

Mounting holes

and

for the second mounting bar.

1-13).

Chapter 1

Install the Shelf and Backplane Cable

UBIC-H

mounting hole

UBIC-V

mounting hole

(Figure

1-12) or by using standoffs

March 2005