Cisco UCS B460 M4 Note d'installation et d'entretien - Page 15

Parcourez en ligne ou téléchargez le pdf Note d'installation et d'entretien pour {nom_de_la_catégorie} Cisco UCS B460 M4. Cisco UCS B460 M4 46 pages. Blade server
Également pour Cisco UCS B460 M4 : Fiche technique (7 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (5 pages), Note d'installation et d'entretien (50 pages)

Overview

to the operating system and the BIOS running on a blade server. A KVM cable ships standard with each blade

chassis accessory kit.

Figure 3: KVM Cable for Blade Servers

Secure Digital Cards

Secure Digital (SD) card slots are provided and one or two SD cards can be populated. If two SD cards are

populated, they can be used in a mirrored mode.

Note

Do not mix different capacity cards in the same server.

The SD cards can be used to store operating system boot images or other information. Once the server is

removed from the chassis, you can access the SD cards from the back of the server. When facing the back of

the server, the SD cards are in the lower right corner. The following figure shows the SD cards and the process

to remove them:

1 Press down on the retainer top to expose the SD cards.

2 While holding down the retainer top, push on the edge of the SD card to remove it.

Figure 4: SD Card Slots

Connector to blade server local console

connection

VGA connector for a monitor

Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs

DB9 serial connector

2-port USB connector for a mouse and keyboard

Secure Digital Cards