Cisco UCS C Series Manuel d'installation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco UCS C Series. Cisco UCS C Series 19 pages. Security manager 4.3
Également pour Cisco UCS C Series : Conseils de dépannage (11 pages), Manuel de mise à jour (11 pages), Manuel de mise à jour (10 pages), Manuel de démarrage rapide (12 pages), Mise en place (10 pages)

Cisco UCS C Series Manuel d'installation
Installing the Server
The factory default username for the server is admin. The default password is password.
Note
Step 10
(Optional) Enable auto-negotiation of port settings or set the port speed and duplex mode manually.
Auto-negotiation is applicable only when you use the Dedicated NIC mode. Auto-negotiation sets the port
Note
speed and duplex mode automatically based on the switch port to which the server is connected. If you disable
auto-negotiation, you must set the port speed and duplex mode manually.
Step 11
(Optional) Reset port profiles and the port name.
Step 12
Press F5 to refresh the settings that you made. You might have to wait about 45 seconds until the new settings appear
and the message, "Network settings configured" is displayed before you reboot the server in the next step.
Step 13
Press F10 to save your settings and reboot the server.
Note
If you chose to enable DHCP, the dynamically assigned IP and MAC addresses are displayed on the console
screen during bootup.
What to do next
Use a browser and the IP address of the Cisco IMC to connect to the Cisco IMC management interface. The
IP address is based upon the settings that you made (either a static address or the address assigned by your
DHCP server).
Note
The factory default username for the server is admin. The default password is password.
To manage the server, see the Cisco UCS C-Series Rack-Mount Server Configuration Guide or the Cisco UCS
C-Series Rack-Mount Server CLI Configuration Guide for instructions on using those interfaces for your
Cisco IMC release. The links to the configuration guides are in the
Roadmap.

NIC Mode and NIC Redundancy Settings

Table 1: Valid NIC Redundancy Settings For Each NIC Mode
NIC Mode
Shared LOM
EXT
Dedicated
Shared LOM
Cisco Card
Valid NIC Redundancy Settings
Active-active
None
Active-active
Active-standby
Active-active
Active-standby
NIC Mode and NIC Redundancy Settings
Cisco UCS C-Series Documentation
Installing the Server
15