Cisco Linksys WAG310G Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cisco Linksys WAG310G. Cisco Linksys WAG310G 39 pages. Wireless-g adsl2+ iad gateway
Imprimer la page
Chapter1
Chapter 1:
Product Overvew
Thank you for choosing the Linksys Wireless-G ADSL2+
IAD Gateway. IAD stands for Integrated Access Device.
The Gateway lets you access the Internet via a wireless
connection or through one of its four switched ports. It also
connects to a traditional phone line, the Public Switched
Telephone Network (PSTN), so you can make calls using
the traditional service or Voice over IP (VoIP).
You can also use the Gateway to share resources such as
computers, printers and files. A variety of security features
help to protect your data and your privacy while online.
Security features include WPA2 security, a Stateful Packet
Inspection (SPI) firewall and NAT technology. Configuring
the Gateway is easy using the provided browser-based
utility.
Front Panel
Power
(Green/Red) The Power LED lights up
when the Gateway is powered on. It flashes
during the self-test. The LED becomes red
during a malfunction.
Ethernet 1-
(Green) These numbered LEDs,
corresponding with the numbered Ethernet
ports on the Gateway's back panel, serve two
purposes. If the LED is continuously lit, the
Gateway is connected to a device through that
port. It flashes to indicate network activity over
that port.
WAN/LAN 5
(Green) The WAN/LAN 5 LED
corresponds with the WAN/LAN5 port and
serves two purposes. If the LED is continuously
lit, the Gateway is successfully connected to a
device through that port. It flashes to indicate
network activity over that port.
Traffc
(Green) The Traffic LED lights up when
the wireless feature is enabled. It flashes when
the Gateway is sending or receiving data over
the wireless network.
Wreless-G ADSL2+ IAD Gateway
Securty
(Green/Red) The Security LED lights
up when wireless security is enabled. It flashes
during the Wi-Fi Protected Setup process. The
LED becomes red when wireless security is
disabled.
USB
Green. The USB LED lights up when the
Gateway is connected to a device through the
USB port. It flashes to indicate USB activity.
Phone 1-2
(Green) The Phone 1 or 2 LED
lights up when a phone is connected to the
corresponding port on the Gateway's back
panel. It flashes when the phone is being used.
Lne
(Green) The Line LED lights up when the
Gateway is connected to the Public Switched
Telephone Network (PSTN) through the Line
port. It flashes when the phone line is in use.
DSL
(Green) The DSL LED lights up when there
is a DSL connection. It flashes when the Gateway
is establishing the ADSL connection.
Internet
(Green/Red) The Internet LED lights
up when the Gateway is connected to the
Internet. It flashes to indicate network activity
over the Internet port. The LED becomes red
when the Internet connection fails.
Top Panel
Product Overview