Cisco VG202 Manuel de configuration du logiciel - Page 48

Parcourez en ligne ou téléchargez le pdf Manuel de configuration du logiciel pour {nom_de_la_catégorie} Cisco VG202. Cisco VG202 50 pages. Voice gateways
Également pour Cisco VG202 : Manuel d'installation du matériel (50 pages), Manuel (10 pages), Manuel d'installation du matériel (48 pages), Manuel de démarrage rapide (19 pages)

Exiting the ROM Monitor

•

Exiting the ROM Monitor

You must set the configuration register to a value from 0x2 to 0xF for the voice gateway to boot a

Cisco IOS image from flash memory upon startup or reloading.

The following example shows how to reset the configuration register and cause the voice gateway to

boot a Cisco IOS image stored in flash memory:

rommon 1 > confreg 0x2101

You must reset or power cycle for new config to take effect:

rommon 2 > boot

The voice gateway will boot the Cisco IOS image in flash memory. The configuration register will

change to 0x2101 the next time the voice gateway is reset or power cycled.

Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide

A-8

FP: 0x80005f9c, PC: 0x80008118

FP: 0x80005fac, PC: 0x80008064

FP: 0x80005fc4, PC: 0xfff03d70

FP: 0x80005ffc, PC: 0x00000000

FP: 0x00000000, PC: 0x00000000

meminfo—Displays size in bytes, starting address, available range of main memory, the starting

point and size of packet memory, and size of NVRAM; for example:

rommon 9> meminfo

Main memory size: 128 MB.

Available main memory starts at 0x10000, size 40896KB

IO (packet) memory size: 5 percent of main memory.

Appendix A

Using the ROM Monitor

OL-16191-01