Cisco VG202 Manuel - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco VG202. Cisco VG202 10 pages. Voice gateways
Également pour Cisco VG202 : Manuel de configuration du logiciel (50 pages), Manuel d'installation du matériel (50 pages), Manuel d'installation du matériel (48 pages), Manuel de démarrage rapide (19 pages)
Chapter 50
Inserting Gateways
where "timestamp" represents the precise date and time that the file was created.
Tip
You must upload the CSV data file to the first node of the Cisco Unified Communications Manager
server, so BAT can access the data input file. For more information, see
Files" section on page
Note
Additional Information
See the
Creating the CSV Data File for Cisco Catalyst 6000 (FXS) Ports
To create the CSV data file that contains the details for each individual Cisco Catalyst 6000 (FXS) port,
such as directory number, description of port, use the BAT spreadsheet.
For information about installing and using the BAT spreadsheet, see the
Gathering Data" section on page
To create a text-based CSV data file for Catalyst 6000 (FXS) ports, see the
File for Cisco Catalyst 6000 FXS Ports" section on page A-18
Procedure
To open the BAT Spreadsheet, locate and double-click BAT.xlt file.
Step 1
When prompted, click Enable Macros to use the spreadsheet capabilities.
Step 2
Click the Catalyst 6000 (FXS) Ports tab.
Step 3
Step 4
Enter information for each port record in a row. Complete all mandatory fields and any relevant, optional
fields. Each column heading specifies the length of the field.
•
•
•
•
OL-24965-01
If you enter a comma in one of the fields, BAT.xlt encloses that field entry in double quotes when
you export to BAT format.
If you enter a blank row in the spreadsheet, the system treats the empty row as the end of the file.
Data that is entered after a blank line does not get converted to the BAT format.
2-1.
For information on how to read the exported CSV data file, click the link to View Sample File
in the Insert Gateways window in BAT.
"Related Topics" section on page
MAC Address—Enter the 12-character MAC address for the gateway.
Port Number—Enter the numeric port number (1 through 24) that you want to add to the gateway.
Directory Number—Enter a directory number, up to 24 numerals and special characters, for this
port. You must enter a directory number if you have specified a partition.(Optional)
Partition—Enter the route partition, up to 50 characters, to which you want this port to belong. Do
not specify a partition unless you also have specified a directory number. (Optional)
Creating the CSV Data File for Cisco Catalyst 6000 (FXS) Ports
50-9.
1-8.
Cisco Unified Communications Manager Bulk Administration Guide
"Uploading and Downloading
"Using the BAT Spreadsheet for
"Creating a Text-Based CSV
for information and examples.
50-3