Epson Stylus Scan 2500 Manuel de configuration - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Epson Stylus Scan 2500. Epson Stylus Scan 2500 35 pages. Epson imaging products (scanners, digital cameras, and stylus scan devices) compatibility chart for macintosh os x classic
Également pour Epson Stylus Scan 2500 : Manuel de l'utilisateur (7 pages), Fiche d'information sur le produit (4 pages), Spécifications (2 pages), Fiche d'information sur le produit (4 pages), Bulletin d'information sur les produits (12 pages), Informations sur le produit (12 pages), Commencer ici (4 pages), Manuel (11 pages), Bulletin d'information sur les produits (3 pages), Liste des pièces (9 pages), Manuel en ligne (10 pages), Commencer ici (4 pages), Informations complémentaires (12 pages)

Press the

delivery system will begin charging the ink.

The ink charging process takes about one minute to complete, during which time

the Operate light flashes and the Stylus Scan produces a variety of mechanical

sounds. These sounds are normal. When the ink delivery system has been charged,

the print head returns to its home (far right) position and the Operate light stays on.

Caution:

Never turn off the Stylus Scan while the Operate light is flashing.

Checking the Stylus Scan

Before using your Stylus Scan, make sure it is working correctly by print a nozzle check

pattern. You may also need to clean the print head.

Follow these steps to load plain paper into the Stylus Scan.

Slide out the output tray. Next, slide the left edge guide so that the distance between

the edge guides is slightly wider than the width of your paper. If you load long

paper, pull out the paper support extension.

edge guide

Fan a stack of paper; then tap it on a flat surface to even the edges.

Checking the Stylus Scan

cleaning button. The Stylus Scan print head will move, and the ink