Epson R1400 Manuel d'instructions de montage - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Epson R1400. Epson R1400 21 pages. Eco-flo continuous ink system
Imprimer la page
When you have carefully installed and aligned the tube clip in its correct location, press firmly ensuring that the tube
clip is clicked and stuck down to the printer body, as illustrated in Fig.42 below.
Step 16 Installing the Foam Strip
The purpose of the Foam Strip is to ensure that the tubing on the Eco-Flo travels under the printer body correctly, as
well as to cushion the tubes from hitting the printer casing when in motion.
Move the head manually across to the left
and bend back the Foam Strip as illustrated above.
Fig.42
Fig.43
Peel back the yellow sticky tape ready for installation
on the printer body.
IMPORTANT!
Please note from the diagram on
the left, the positioning of the
Foam Strip is crucial in that only
one tube should be visible from
the above angle. Please follow the
steps over the page.
16
Fig.44