Motorola CD303 Manuel de l'utilisateur - Page 35
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola CD303. Motorola CD303 48 pages.
Imprimer la page
d
u
4. Scroll
or
to
If you choose
Select
d
u
•
Scroll
or
d
u
•
Scroll
or
n
Select.
5. Press
to return to standby.
9.5
Recall mode
Recall is useful to access certain network services and PABX / switchboard services.
The default recall mode preset in the CD3 is suitable for your country network and
therefore you should not need to change it.
NOTE
The use of the CD3 cannot be guaranteed on all PABX.
1. Press Menu, scroll
d
2. Scroll
to
Set Base
d
3. Scroll
to
Recall Mode
n
d
u
4. Scroll
or
to
5. Press
to return to standby.
9.6
Change the System PIN
The System PIN is required when changing certain settings and for registration / de-
registration. The default setting is 0000. You can change this to your own preferred number
(up to 8 digits).
When you enter a PIN, the digits are shown as ****.
1. Press Menu, scroll
d
2. Scroll
to
Set Base
d
3. Scroll
to
System PIN
4. Enter the old PIN (Default setting = 0000) and press OK.
5. Enter the new PIN and press OK.
n
6. Re-enter the new PIN and press OK.
7. Press
to return to standby.
NOTE
It is advisable to make a note of your new PIN code and keep it somewhere safe.
Base settings
All Handsets
or
Select Handset
Handset, all available handsets are displayed.
to the handset you want then press Select.
to the number of rings that you want to set: 2,
d
to
Settings
and press Select.
and press Select.
and press Select.
Recall 1
(100ms) or
Recall 2
d
to
Settings
and press Select.
and press Select.
and press Select.
then press Select.
4
(600ms) and press Select.
or
6 Rings
and press
35