Motorola XPR 4550 Manuel d'installation - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Motorola XPR 4550. Motorola XPR 4550 45 pages.

2-4

2.2

Radio Mounting

C a u t i o n

The mounting location must be accessible and visible. Select a location that will permit routing the

RF antenna cable as directly as possible.

NOTE: For new or existing installations, use one of the following mounting kits GLN7342B (Low

profile mounting bracket), GLN7324B (High profile mounting bracket), RLN4799B (Key Lock

mounting bracket) or RLN5999A ( Dim Mounting Bracket). Orient the mounting trunnion as

shown in

March 23, 2006

CAUTION: DO NOT mount the radio on a plastic dashboard

without first reinforcing the dashboard; the weight of the radio may

crack or break the dashboard.

CAUTION: DO NOT mount the radio on a flat or concave surface

where the radio could be partially submersed in water. This is

especially important if the cab area of the vehicle is cleaned by

spraying with water. If the radio sits in water for a length of time,

moisture may seep inside the radio and damage the electronic

components.

CAUTION: DO NOT allow water to stand in recessed areas of

vertically mounted radios. Remove any moisture immediately to

prevent it from seeping down into the radio.

Figure 2-5

RADIO

FRONT

APPLIES TO RADIOS WITH INTEGRAL

OR REMOTE MOUNT CONTROL UNITS

Standard Configurations: Radio Mounting

6816812H01