Toshiba 23S2400 Series Manuel du propriétaire - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Toshiba 23S2400 Series. Toshiba 23S2400 Series 27 pages. Led tv
Imprimer la page
Turning the TV on
Switching on the TV
Connect the power cord to a wall outlet.
1
Press
on the remote control or
left side panel.
Note:
If you watch black and white programmes when the
Colour System mode is set to "A" (Automatic), colour
noise may appear on the screen. In this case select the
appropriate Colour System (For the system of each
country or region, refer to pages 10, 25).
Switching off the TV
1
Press
on the remote control or
left side panel to switch to the standby mode.
Notes:
When the TV will not be used for a long period of
time, such as during vacation or travel, remove the
power plug from the wall outlet.
The TV will automatically turn off in 15 minutes
based on No Signal Power Down settings (
15) if no signal is detected.
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power is
going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent
the TV from turning on in your absence.
Tuning the TV for the rst time
Before switching on the TV, put your decoder and
media recorder to standby, if they are connected, and
ensure that the aerial is connected. To setup the TV, use
the buttons on the remote control as detailed on page 7.
1
Press
the button. The Quick Setup screen will
appear. This screen will appear the rst time that
the TV is switched on.
Quick Setup
M
e
n
u
L
a
n
g
u
a
g
e
2
Press
or
to select the menu language.
3
Press OK, to display the Location menu. Press
or
to select Store or Home. For normal home
use, select Home.
You can select either Home or Store mode.
Home is recommended for normal home use.
Select Store when using a TV for displaying in a
shop, etc.
Location
To use the TV for displaying in a store showroom, please select
[Store]. [Home] mode is recommended for normal use.
on the TV
on the TV
E
n
g
s i l
h
Home
Store mode:
A con rmation menu will appear.
4
Press OK to display the Auto Tuning menu, and
then press
Auto Tuning
Auto Signal Booster
5
Select Start Scan and press OK to start the
automatic search.
Auto Tuning
P
o r
g
e r
1
%
When the automatic search is completed, the
TV will automatically appear the Manual Tuning
menu. Use the Manual Tuning operation if desired
channels cannot be preset with the Auto Tuning
or if you would like to preset channels to speci c
position numbers one by one.
page
Manual Tuning
Pos.
0
1
2
3
4
5
6
7
6
Press
you want to arrange and press OK to display the
breakdown menu.
Press
to select the item as shown below.
Manual Tuning
Position
1
A
A. Position selection
B. System (Sound) (
C. Colour System (
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
- 9 -
to select On or Off.
or
Start Scan
s s
Label
or
to select the programme position
or
to select an item, then press
B/G A
C
1
0
On
C
E
G
I
B
D
F
H
page 25)
page 25)
On
F
o
u
n
d
0
or
J