Epson PowerLite Pro G6150 Manuel d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Epson PowerLite Pro G6150. Epson PowerLite Pro G6150 47 pages. 3lcd projector
Également pour Epson PowerLite Pro G6150 : Manuel d'utilisation (48 pages), Manuel d'utilisation (49 pages), Référence rapide (7 pages), Manuel d'installation (3 pages)
Imprimer la page
Installing EasyMP Network Updater
Download and install EasyMP Network Updater on your computer.
Note: You need administrator authority to install EasyMP Network Updater.
1. Download the latest version of EasyMP Network Updater from the
2. Double-click Setup.exe to start the installer.
3. Follow the on-screen instructions.
Parent topic:
Selecting Projector Network Settings
If the projector you want to update is not connected to your network, select the necessary settings to
connect it to your network. Connect the projector using a wired network system. Firmware cannot be
updated over a wireless LAN.
Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
Parent topic:
Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
To connect a projector to a wired LAN, you need to select network settings on the computer and the
projector.
1. Check that DHCP is available under the current network environment.
Note: If DHCP is not available, write down the following values that are available for your projector.
• IP Address
• Subnet Mask
• Gateway Address
2. Connect the computer to the network.
Note: To set up a network connection, see the documentation supplied with your computer or
network adapter.
3. Connect a LAN cable to the projector.
Installing the Application
Setting Up EasyMP Network Updater for the First Time
Epson
8
website.