Toshiba E-Studio 190F Manuel rapide - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Toshiba E-Studio 190F. Toshiba E-Studio 190F 40 pages. Internet facsimile/email and network scan functions
Également pour Toshiba E-Studio 190F : Manuel rapide (2 pages), Manuel rapide (16 pages)

Imprimer la page

FCC Notice for Users in USA

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one of the following measures:

1. Reorient or relocate the receiving antenna.

2. Relocate the fax machine with respect to receiver or other equipment.

3. Connect the fax machine into outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Warning: To assure continued compliance, use only USB shielded interface cable when connecting this

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

TOSHIBA AMERICA BUSINESS SOLUTIONS, INC.

Electronic Imaging Division

2 Musick, Irvine, CA 92618-1631

Note: For Technical Support, please contact your service representative.

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.

On the rear panel of this equipment is a label that contains, among other information, a product

identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the

telephone company.

Ask your telephone company or installer to install the jack suitable for your device if such is not available.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply

with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord

and modular plug is provided with this product. It is designed to be connected to a compatible modular jack

that is also compliant. See installation instructions for details.

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive

RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but

not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that

may be connected to a line, as determined by the total RENs, contact the local telephone company. The

REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits

represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).

If your telephone equipment causes harm to the telephone network, the Telephone Company may discontinue

your service temporarily. If possible, they will notify you in advance. But if advance notice isn't practical, you

will be notified as soon as possible. You will be informed of your right to file a complaint with FCC.

Getting To Know Your Machine

Precautions

product to host computer. Also, any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this equipment.