MSI 700 Manuel du matériel - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel du matériel pour {nom_de_la_catégorie} MSI 700. MSI 700 30 pages. Msi axis 700: install guide

The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA/66 Controller

that provides PIO mode 0~4, Bus Master, and Ultra DMA/33/66 function. It

has two HDD connectors IDE1 (primary) and IDE2 (secondary). You can

connect up to four hard disk drives, CD-ROM, 120MB Floppy (reserved for

future BIOS) and other devices to IDE1 and IDE2. These connectors

support the provided IDE hard disk cable.

IDE1 (Primary IDE Connector)

The first hard drive should always be connected to IDE1. IDE1 can

connect a Master and a Slave drive. You must configure second hard

drive to Slave mode by setting the jumper accordingly.

IDE2 (Secondary IDE Connector)

IDE2 can also connect a Master and a Slave drive.

2-11