Pioneer X-HM21BTD-K Manuel d'utilisation - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer X-HM21BTD-K. Pioneer X-HM21BTD-K 44 pages. Cd receiver system
Imprimer la page
04
Getting started
Sound controls
Equalizer
When the EQUALIZER is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER repeatedly until the desired sound mode
appears.
FLAT
ACTIVE
DIALOGUE
NIGHT
P.BASS control
When the power is first turned on, the unit will enter the
P.BASS mode which emphasises the bass frequencies. To
cancel the P.BASS mode, press the P.BASS on the remote
control.
Bass/treble control
Press the BASS/TREBLE, then press /// to adjust the
bass or treble.
Note
Simultaneous operation of EQUALIZER, P.BASS and BASS/
TREBLE is not possible. Only the functions that you have
selected will be active.
If you select one of three functions, features
that are not selected will be set as follows.
1
If you change the settings of P.BASS (ON/
OFF).
• EQUALIZER : FLAT
• BASS/TREBLE : BASS=0, TREBLE=0
2
If you change the settings of EQUALIZER.
• P.BASS : OFF
• BASS/TREBLE : BASS=0, TREBLE=0
3
If you change the settings of BASS/TREBLE.
• P.BASS : OFF
• EQUALIZER : FLAT
14
En
A flat and basic sound.
A powerful sound that
emphasizes low and high tones.
A sound that allows the radio or
vocals to be heard more easily.
A sound that can be enjoyed
at night even with lower volume.
Setting the wake-up timer
Used to change the existing timer setting, or to set a new
timer.
Press STANDBY/ON to turn the power on.
1
2
Press and hold CLOCK/TIMER.
Press / to select "ONCE" or "DAILY",
3
then press ENTER.
ONCE – Works once only at a preset time.
DAILY – Works at the preset time on a preset day.
Press / to select "TIMER SET", then
4
press ENTER.
Press / to select the timer playback
5
source, then press ENTER.
• CD, DAB, FM, USB/iPod, USB, BT AUDIO, AUDIO IN
and LINE can be selected as the playback source.
Press / to select the timer day, then
6
press ENTER.
Press / to set the hour, then press
7
ENTER.
Press / to set the minute, then press
8
ENTER.
• Set the time to finish as in steps 7 and 8 above.
9
Adjust the volume press VOLUME +/–, then
press ENTER.
10 Press STANDBY/ON to enter the power
standby mode.
• The TIMER indicator lights up.