Pioneer M-NS1 Manuel d'utilisation - Page 26

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer M-NS1. Pioneer M-NS1 40 pages. Stereo power amplifier
Également pour Pioneer M-NS1 : Manuel d'entretien (4 pages), Manuel (32 pages)

Imprimer la page

The tape deck features auto-reverse, Dolby B NR (noise

reduction) and auto tape select. The auto-reverse feature lets

you play or record both sides of the tape without physically

taking it out and turning it over. Dolby B NR reduces tape hiss

on tapes recorded using Dolby NR (which includes almost all

commercially recorded tapes). Auto tape select means that the

deck automatically detects the type of tape you're playing—

normal (type I) or high-position/C

no need to check the tape type and switch manually. Here,

we'll run through the basic tape deck controls; instructions for

other features, such as recording, start on page 28.

DIRECT PLAY 3

TAPE

Playback will start from the side facing you when you load it.

If you're using the top panel controls, press 2 3 to start

playback.

Use a tape that's already recorded on so you can hear

something in the following steps!

(type II)—so there's

The side of the tape you'll hear is whichever is facing toward

you when you load it. This is the 'forward' (3) direction,

while the other side is 'reverse' (2). The forward indicator is

shown in the display.

Each time you press tape during playback, the other side of

the tape starts playing. Pressing tape when the tape is stopped

starts playback on the side it was playing previously.

The current tape direction is indicated in the display.

¢ searches for the next blank space between tracks on the

side currently playing (in other words, to the start of the next

track), then resumes playback.

4 searches for the previous blank space between tracks on

the side currently playing (in other words, to the start of the

current track), then resumes playback.

By pressing 4 or ¢ more than once, the

skip several tracks at once (up to a maximum of 15). For

example, press ¢ twice to skip forward two tracks.

Track search is unlikely to work reliably in the

following cases:

• if the space between tracks is less than about 4 seconds

• if the recording is particularly noisy so the spaces are not

recognized

• if the recording contains frequent silences, such as a

language study tape.

• if the recording contains sections of very quiet material,

such as some classical music recordings

Press 0 on the top panel to eject the tape.

If there's already a tape in the deck, then pressing the

button — even when the system is in standby mode— will

switch the system on and start the tape playing.

tape deck

will