Pioneer DV-490V-K Manuel d'utilisation - Page 35

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer DV-490V-K. Pioneer DV-490V-K 48 pages. Pioneer operating instruction dvd player dv-393-s dv-490v-s
Également pour Pioneer DV-490V-K : Manuel d'utilisation (48 pages), Manuel d'utilisation (48 pages)

Imprimer la page

Initial Settings menu

Setting

DTS Out

96 kHz PCM Out

MPEG Out

HDMI Out*

* DV-490V only.

Video Output settings

Setting

TV Screen

(This setting effective for

analog and HDMI video

output. See also Screen

sizes and disc formats

on page 41.)

Component Out

Option

DTS

Off

96kHz > 48kHz

96kHz

MPEG > PCM

MPEG

LPCM (2 ch)

Auto

Off

Option

4:3 (Letter Box)

4:3 (Pan & Scan)

16:9 (Wide)

Interlace

Progressive

What it means

DTS encoded digital audio is output when playing a DTS disc.

(Noise will be output if your amplifier/receiver is not compatible

with DTS audio.)

No digital audio is output when playing a DTS disc.

96 kHz digital audio is converted to 48 kHz for digital output.

96 kHz digital audio is output as is at 96 kHz.

MPEG encoded digital audio is converted to PCM audio for

digital output.

MPEG encoded digital audio is output as is.

Set if your monitor or device only accepts stereo input. On this

setting multichannel audio is downmixed to 2 channels for

stereo linear PCM output. (In case of DTS source, the HDMI

audio output is turned off.)

Dolby Digital, DTS and MPEG sources are processed

according to how they were encoded, but if your amplifire/

monitor is not compatible with DTS audio, DTS audio output

from HDMI is turned off. Linear PCM sources are heard as is.

No digital audio output.

What it means

Set if you have a conventional 4:3 TV. Widescreen movies are

shown with black bars top and bottom.

Set if you have a conventional 4:3 TV. Widescreen movies are

shown with the sides cropped so that the image fills the screen.

Set if you have a widescreen TV.

Set if your TV is not compatible with progressive scan video.

Set if your TV is compatible with progressive scan video (see

your TV's instruction manual for details). See also Switching

the video output to interlace using the front panel controls on

page 13.

Note that progressive scan video is only output from the

component video jacks and that there is no output from the

composite and S-video jacks when this setting is selected.