Pioneer PDP 607CMX Manuel de référence - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de référence pour {nom_de_la_catégorie} Pioneer PDP 607CMX. Pioneer PDP 607CMX 22 pages. Industrial plasma display panel
Également pour Pioneer PDP 607CMX : Brochure & Specs (4 pages)

Imprimer la page
1) Obtaining QST Status Information
Sequence
Data Content
1
STX
2
Command echo-back
3
Generation information
4
Inch information
5
Forwarding
6
Power source state
7
During standby: Standby cause
During power supply: main screen signal status
8
During standby or 1 screen display: dummy data
During 2-screen display: sub screen signal status
9
Main input function information
10
Sub input function information
11
Main screen size information
12
Two-screen display state
13
Functional lock information
14
Temperature information 1 (interior)
15
Temperature information 2 (outside air)
16
Temperature information 3 (SLOT)
17
Serial No.
18
Dummy data
19
Dummy data
20
HOUR METER
21
Check sum
22
ETX
Note 1) During standby and during a single screen display, the unit outputs the value that is in memory.
Note 2) During standby and immediately after POWER ON, the correct value is not output.
In this case, please obtain the information after waiting a short period of time after POWER ON.
These types of information are output as reference information (these are not guaranteed information).
Normally refer to temperature information 3.
Size
1 Byte
02hex
3 Byte
QST (fixed)
1 Byte
5 (fixed)
1 Byte
6: 60 inch
1 Byte
M (fixed)
1 Byte
S: Standby status P: Power supplied status
1 Byte
N: Normal standby time
W: Standby time based on POWER MANAGEMENT
S: Standby time based on SD or PD
N: normal signal input time
L: no signal input time
O: OUT OF RANGE signal input time
1 Byte
N: normal signal input time
L: no signal input time
O: OUT OF RANGE signal input time
3 Byte
IN1: INPUT1 IN2: INPUT2 IN3: INPUT3 IN4: INPUT4
IN5: INPUT5
3 Byte
IN1: INPUT1 IN2: INPUT2 IN3: INPUT3 IN4: INPUT4
IN5: INPUT5 Note1)
1 Byte
0: DOT BY DOT 1: 4:3 2: FULL 3: ZOOM 5: WIDE 6: 14:9
9: UNDERSCAN A: 2.35:1
1 Byte
0: OFF (1 screen)
2: PinP (lower right)
4: PinP (upper left)
6: SIDE BY SIDE 2-L
A: SIDE BY SIDE 3
C:SIDE BY SIDE 4-R
1 Byte
0: LOCK OFF 1: BUTTONS LOCK 2: IR LOCK
2: IR LOCK
3: IR&BUTTONS LOCK
4: MEMORY LOCK
3 Byte
Temperature inside the set (Centigrade) Note 2)
3 Byte
Outside air temperature (Celsius) Note 2)
3 Byte
SLOT temperature (Celsius) Note 2)
15 Byte
15 digit character string
3 Byte
2 Byte
5 Byte
5 digit number
2 Byte
1 Byte
03hex
RS-232C Adjustment
Remarks
1: SIDE BY SIDE 1
3: PinP(upper right)
5: PinP(lower left)
9: SIDE BY SIDE 2-R
B: SIDE BY SIDE 4-L
16