Whirlpool 4370076 Manuel d'instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Whirlpool 4370076. Whirlpool 4370076 11 pages.

Imprimer la page

Procedure

Important

Save all screws and reuse in original location.

1. Remove top handle end caps by removing screws.

2. Remove cn~~hedkubed ice switch cover on

dispenser by pulling forward. Release bottom clips

on dispenser cover by placing taped edge of putty

knife underneath cover and pulling out. Release top

clips by holding bottom of dispenser cover out and

sliding up.

6. InstaY new top handle end caps by pladng on

handles. Insert and tighten screws.

7. Replace dispenser cover by snapping in place.

Replace switch cover by snapping in p&e.

6. Remove toe grille by pulling fomard.

Caution

To avoid personal injury or property damage,

temporarily tape doors shut.

9. Tape doors shut using masking tape.

WARNING

Electrical Shock Hazard

Green ground wire must remain attached to hinge.

Failure to do so can result in death or electrical shock.

10. Remove top hinge covers by removing screw%

Trscs around lop hinges with a pencil. This helps

alignment when reassembling. Unplug top hinge

wire connectors. Do nof remove green ground wire

mm hinge. Remove top hinge screws.

3. Remove door handle inserts by placing screwdriver

at top of door handles in area between handle and

insert and pulling out. Pull inserts out along length

of handles.

Remove end caps from bottom of handles by putting

down. Install new bottom handle end caps by

placing end caps in bottom of handles and snapping

in place.

5. Install new handle inserts by placing insert on

handles and snapping in place.

wire conr#eto

wire wnnecton

11. Remove tape from refrigerator door. Qmsp

refrigerator door securely and lift up while opening.

This will free door from bottom hinge pin. Top hinge

nUyCOfllBOffdOOK