Whirlpool UXT2036AYW0 Instructions d'installation et manuel d'utilisation et d'entretien - Page 11

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Whirlpool UXT2036AYW0. Whirlpool UXT2036AYW0 28 pages. 30" (76.2 cm) and 36" (91.4 cm) range hood

Imprimer la page

RANGE HOOD CARE

IMPORTANT:

Clean the hood and grease filters frequently

according to the following instructions. Replace grease filter

before operating hood.

Exterior Surfaces:

IMPORTANT:

Do not use soap-filled

scouring pads, abrasive

cleaners, Cooktop Polishing Creme, steel wool, gritty washcloths

or paper towels.

To avoid damage to the stainless steel, do not use cleaners that

contain chlorine.

Cleaning

Method:

•

Rub in direction of grain to avoid scratching

or damaging the

surface.

For stainless steal models, Stainless Steel Cleaner and Polish

Part Number 31462A (not included): See "Assistance

Service" section to order.

•

Liquid detergent or all-purpose

cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

•

Glass cleaner to remove fingerprints.

Metal Grease Filter

1. Remove screw from the grease filter retainer.

2. Turn the grease filter retainer to release filter.

Replacing the Incandescent Light Bulb

Turn off the range hood and allow the light bulb to cool.

1. Disconnect

power.

2. Squeeze the plastic lens cover and remove it from the hood.

A. Light bulb socket

B. Lens cover

3. Screw light bulb into socket.

4. Replace lens cover by squeezing cover and inserting tabs

into slots.

5. Reconnect power.

If new light does not operate, make sure the lamp is inserted

correctly before calling service.

A. Filter retainer

3. Wash metal filters as needed in dishwasher or hot detergent

solution.

4. Reinstall the filter by placing the back edge in the channel at

rear of hood. Push filter into place, turn the filter retainer to

secure filter to range hood.

5. Replace screw in the grease filter retainer.