Whirlpool WT9BTABC Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Whirlpool WT9BTABC. Whirlpool WT9BTABC 19 pages.

1. Location

 Air turbulence from window/door may reduce the effectiveness of hood. Suggest to close

window or door before using the hood. (FIG. 1)

 The hood has to rise up to 250 mm from cooktop in order to bring up the efficiency and deliver

the best performance.

2. Position

 The installation height is measured vertically from center of aluminum filter of hood to the

cooktop .

 The min height is 650mm and the max installation height is 750mm from gas hob.(FIG. 2)

 Ensure your cooker hood is installed horizontally and balance, avoid left-right or front-dropped

inclination.(FIG. 3)

65cm

75cm

3. Exhaust duct

 6"diameter exhaust duct is recommended to use in order to maximize suction efficiency.

 Before installing the hood, please apply fast drying glue to the collar then insert exhaust duct

into the collar; use fast drying glue to seal the connected part of the collar and the exhaust

duct.

4. Mounting of the V-flap

Install V-Flap to the cooker hood, procedures as follow:

 Mount a half-part of V-Flap ① into the body ⑥

Installation

(FIG.1)

(FIG.2)

√

(FIG.3)