Xerox ColorQube 9201 Manuel d'utilisation rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation rapide pour {nom_de_la_catégorie} Xerox ColorQube 9201. Xerox ColorQube 9201 38 pages. Mfp
Également pour Xerox ColorQube 9201 : Instructions d'installation et d'utilisation (14 pages), Manuel de l'évaluateur (28 pages), Manuel rapide (8 pages), Manuel rapide (16 pages), Installation et fonctionnement sécurisés (12 pages), Installation et fonctionnement sécurisés (12 pages), Comment faire une copie (9 pages)

Power On and Off

To power ON: Press the Power ON/OFF switch on the left side of the

device to switch on the device. Some functions will be ready before

others. The device will be ready to scan in approximately 3 minutes.

To power OFF: Press the Power ON/OFF switch on the left side of the

device. A confirmation screen will appear, touch the Power Down button.

Note:

The device will automatically shut down after 60 seconds if you do

not touch the Power Down button. Power Down will result in the deletion

of any jobs currently in the list. Do not switch on until the device has

completely powered off. Do not physically move the device unless it has

been powered off for more than 30 minutes.

Energy Saver and Quick Restart

The Energy Save button on the control panel can be used for additional power

functions.

Select the Energy Save button on the control panel.

•

If Energy Saver is selected, the device will immediately enter the Power

Saver Mode appropriate to its configuration. If there are any jobs in the

job list, a second screen displays.

To re-activate the device when in this mode, touch a button on the touch

screen or control panel.

•

If Quick Restart is selected and confirmed the device will restart. Any

copy jobs in the job list will be deleted, print jobs in the job list are

recovered.

•

If Cancel is selected the power down options will be cancelled and the

device will be available for use.

ColorQube™ 9201/9202/9203

Quick Use Guide

Power On and Off